Lawn VivaGreen MossOff - 5 Litre Large Size

Product Information

These products can be applied from March to October when temperatures are above 15°C (59°F). Theyrequire wetting before they become active.Mow the lawn short before application andwait seven to ten days before mowing again. If you’re using a powdered moss killer , apply it in horizontal lines parallel to the roof’s edge. The lines should be spaced about 2 to 4 feet apart. Some of these powders need rainfall to be activated and distributed, so apply them when rain is forecasted. Additionally, installing high-quality gutter guards can reduce the frequency with which you need to clean them. Another option for removing moss without damaging the roof shingles is to use zinc or copper strips. These are long strips of metal that are installed below the ridges of roofs and are at their most effective when installed on a new roof before moss and algae have had the opportunity to grow because it makes the roof an inhabitable area, but they can also be retrofitted to remove moss and algae as well as preventing future growth. How do zinc or copper strips work?

It’s also possible to make homemade moss killer for roofs if you like to experiment and save some money. Homemade moss killers are generally less toxic than the ready-made chemical products you buy from the shop.Moss, algae, mildew and other unwanted growth can make your driveway look untidy. When left untreated, they can also compromise the integrity of your driveway. To directly prevent moss growth , you can install a treated metal strip near the top of any roof surface prone to developing moss. Most moss removal solutions contain zinc, so installing zinc strips will turn precipitation running down your roof into a constant moss killer . Moss growth on a resin driveway is often more noticeable during colder months, particularly in coastal or exposed regions where snow, ice, and frost can accumulate. Your resin driveway, although anti-slip, may become slippery if there is build-up of residue or the ice is left untreated. In these damp periods you can experience moss and algae. How To Get Rid Of Moss On Driveway? You can buy an effective moss killer from various home improvement retailers, like B&Q. These normally come in a spray bottle so you can apply the chemical easily.

Chemical moss removers can be used to remove moss from the lawn. However, since they can be toxic, they should only be used when all other methods and efforts have proved ineffective. Some roof moss killer products like Smartseal Moss Removercan be applied to the moss-covered roof tiles without having to rinse it afterward. It’s always important to read the manufacturers instructions because not all roof moss killer products work the same. To avoid damaging the surface you will need to mix the bleach with water! Although this will weaken it, the bleach will still be strong enough to kill the moss.When choosing a chemical solution, make sure to read the label carefully and follow the instructions to avoid damaging your roof. Choosing the Right Time for Cleaning Alternatively, if you've killed and removed moss by other means consider using MossOff just prior to over seeding or 4 weeks afterwards to take advantage of the residual moss control effect.

Now that you know why there is moss on your roof, it’s time to make a plan to get rid of it. Because moss needs water and damp spaces to survive, your roof is likely holding onto water and not draining properly. This involves using a hose with preferably a flat spraying nozzle, held at 20cm from the driveway surface to clean the surface and at a pressure of not more than 150 bar. Given all these possible places and surfaces where moss can grow, it’s not surprising that there are many different ways to remove moss. Once MossOff ® had dried, it forms an invisible micro-coating that is durable, not affected by rainfall, and continues acting to preventing moss growth for a long time.I always recommend using Smartseal Moss Removerbecause its the most effective at killing roof moss. Usually, the most effective pH level for killing algae, moss and other unwanted growth is pH value of 3. Acid-based cleaners are effective in eliminating moss and algae completely but care must be taken so as not to damage the resin surface. Also, it should not be used too often. Sodium Peroxide: One huge benefit of installing a resin driveway is its minimal maintenance requirement. Resin driveways are far less demanding in terms of maintenance when compared with other traditional driveway surfacing materials.